Operation Manual

Using your LinkStation
LinkStation User Manual 71
Remove Disk
To remove the hard drive:
If the LinkStation is powered on, dismount the USB hard drive before unplugging it. Hold in the
function button for 3 seconds. The blue LED will go out, and the drive is dismounted. You may now
unplug it safely.
Notes:
• If the LinkStation is o, then the USB device is already dismounted, and you can remove it safely.
• If a USB drive is unplugged without being dismounted rst, it may not be recognized properly
when it is reconnected. If this happens, restart the LinkStation and then reconnect the drive.
Function
Button
Power LED