Operating Guide

MAINTENANCE
Disconnect the battery supply before cleaning. Wear safety eyewear before cleaning. Use compressed dry air to blow off dust
and debris. Use a soft bristle brush if compressed air is not available.
Applying excessive force to the tool can overload the motor, decrease the life and increase the wear on the tool.
Some chemicals damage the product. Do not use harsh chemicals such as gasoline, carbon tetracholiride, paint thinner, etc.
A qualified repair technician must perform any tool service or repair. Service or maintenance performed by unqualified personnel
could result in injury. Use only identical replacement parts. Use of unauthorized parts or failure to follow maintenance instructions may
create a risk of electric shock or injury.
Use only mild soap and a slightly damp cloth to clean the tool.
Remove the Battery by pressing the side tabs of the battery charger (Figure 3). Insert into Battery Charge device, and allow to charge for 3-5
hours.
If using for the first time, you should charge the battery before use.
ACCESSORIES
Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may
become hazardous when used on another tool.
PS072150909
PS07215 18 Volt Cordless Drill Operating Instructions
7