Owners manual

118
Save
Restore
Settings&
Firmware
Settings&
Firmware
Restore
Settings&
Firmware
Restore
Settings&
Firmware
Make a note of the drive configuration (number of drives, RAID, LVM, etc.) of the TeraStation whose the settings
were saved. Make sure that any TeraStation that you apply these settings to has exactly the same drive configuration
before you apply the settings. If the drive configuration is different, you may get unexpected results.
The following settings are not saved or restored:
Category Settings
File Sharing Shared folder information of the USB drive
Storage
All settings in "Drives"
All settings in "LVM"
All settings in "iSCSI"
USB drive information
Web Services Task settings of Dropbox Sync
Network
All settings except for service port restrictions, Wake-on-
LAN, and MTU size settings in "IP Address"
All settings in "Port Trunking"
Backup All settings in "Failover"
Management
The TeraStation's hostname
All settings in "Power Management"
All settings in "SSL"
Display language in Settings
Saving Settings
1 Insert a 1 GB or larger USB drive (not included) into a USB port on the TeraStation.
Note: All data on the USB drive will be erased!
2 In Settings, click Management.
3 Click to the right of "Configuration Management".