Owners manual

149
5 Swing the lock back down until it clicks into place.
6 Close the front cover.
7 When the replacement drive is recognized, the status LED will flash red and the I31 message will be displayed
on the LCD panel.
8 Press the function button on the front of the TeraStation. The TeraStation will beep. If replacing multiple
malfunctioning drives at once, select the replaced drives on Settings and click Recover RAID Array.
9 For RAID 1, 5, or 6:
The TeraStation will start rebuilding the RAID array automatically. After a few minutes, the I18 message will be
displayed until the array is rebuilt.
For JBOD:
The drive will be formatted as an individual drive. Create a shared folder on the drive before use.