Owners manual

If you enabled LVM for the target drive or array, or selected "File I/O" for the "Backstore" option, the volume size

that you specify here can be changed later. To change the volume size, refer to the "Expanding Volume Sizes"

section below.

6 The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.

7 Click OK, then Close.

Note: If you click Disable Connection for the selected volume in Storage - iSCSI in Settings, the selected iSCSI

volume can no longer be accessed. If you click Enable Connection, the volume will become accessible from the

iSCSI initiator software.

Connecting or Disconnecting Volumes

Note: By default, the IP address of the TeraStation is automatically assigned from a DHCP server. However, in

this case, if you turn off and restart the TeraStation, the IP address may be changed and the volumes on the

TeraStation may not be accessible. To avoid changing the IP address unexpectedly, using a fixed IP address for

the TeraStation is recommended.

Connecting Volumes

To connect a volume, follow the procedure below.

Note: Do not shut down the TeraStation while connecting to an iSCSI volume. It may cause unexpected data

erasure. Make sure all connections are disconnected before shutdown.

1 In Windows, navigate to Control Panel - Administrative Tools - iSCSI Initiator.