Owners manual

62
8 In the "Targets" tab, select the volume from "Discovered targets" and click Connect.
9 Click Advanced.
10 Select the "Enable CHAP log on" checkbox and enter the target CHAP name into the "Name" box and the
target CHAP secret into the "Target secret" box.
If mutual authentication is enabled, select the "Perform mutual authentication" checkbox.
11 Click OK twice.
12 If the status of the selected volume is displayed as "Connected" under "Discovered targets", the connection is
established properly.
Accessing the access-restricted volume is finished.
Expanding Volume Sizes
The volume size of the existing volumes can be expanded after they are created.
Notes:
• Expanding the volume size may erase all data in the volume depending on the formatting type. Back up the
data before expanding the volume size is recommended.
• To expand the volume size, the volume should be have "File I/O" selected for the "Backstore" option, or was
created in a drive or array with LVM enabled.
1 In Settings, click Storage.
2 Click to the right of "iSCSI".
3 Select the volume to expand.