User manual

ROUTER
POWER
INTERNET
LAN
１
２
３
４
ON
OFF
AUTO
AirStation
1) connect
2) connect the power supply
LANcable
power outlet
PC
1) connect
power outlet
modem
ON
computer
Chapter 3 Installation
WHR-HP-GN / WHR-HP-G300N User Manual 17
5
ConnecttheAirStation’sLANporttoyourcomputerwithanotherLANcable.
TurnontheAirStation,wait60seconds,andthenturnonyourcomputer.
6
Conrm that the devices are connected correctly as shown below.
7
Afterthecomputerhasbooted,theLEDsontheAirStationshouldbeinthefollowingcondi-
tion:
POWER Greenlighton
WIRELESS Greenlightonorblinking
ROUTER Greenlightonorodependingonyournetwork
DIAG O
LAN Greenlightonorblinking
INTERNET Greenlightonorblinking
※
Refertopage8and10forLEDlocationsandotherdetails.
8
Launchawebbrowser.Ifthehomepageisdisplayed,setupiscomplete.
Ifausernameandpasswordscreenisdisplayed,enter[root](inlowercase)fortheusername,
leavethepasswordblank,andclick[OK].Followtheinstructionsonthescreentocomplete
setup.
You’vecompletedinitialsetupofyourAirStation.RefertoChapter4foradvancedsettings.