User manual

Connecting to a Preexisting Network

ToaddanAirStationwithoutchangingyourexistingLANconguration,justconnectall

thecablesandpowerontheAirStation.WiththemodeswitchsettoAUTO,AirStation

canbeaddedtotheexistingnetworkautomatically,withoutchanginganysettingsin

otherpartsofthenetwork.YoucannowbereleasedfromcomplicatedLANsettings!

TospecifytheAirStation’sIPaddress,proceedinsteadasfollows:

1.SettheAirStationtoAPmodebymovingtheswitchfrom

AUTO to OFF.

2.ConnectoneoftheAirStation’sLANportstoanexistingrouterorswitchonyour

network.

3.Temporarilychangeyourcomputer’sIPaddresstoanunusedaddressonthe

192.168.11.xsubnet,withsubnetmask255.255.255.0.

4.Type“192.168.11.100”intoabrowserwindowtoopentheAirStation’sConguration

Tool.

5.In

LAN Cong,congurethefollowingsettings:

 IPAddress=[192.168.11.137](Specifyanunusednetworkaddressfromtheexisting

LAN.)

 SubnetMask=[255.255.255.0](UsethesameSubnetMaskastheexistingLAN.)

6.RestoreyourPC’sIPaddresssettingstotheiroriginalvalues.

Note:WhilethemodeswitchisintheOFFposition,theAirStation’sWANportmayalso

beusedasafthLANport.