User manual

52
IP Filter setting - Limits the
type of packets allowed to pass
between the WAN and LAN.
The maximum number of rules
is 32.
• Operation - Packets from
WAN (or LAN), select ignored,
rejected, or accepted. Select
the operation to be performed
on the packets.
Packets from:
•WANside-packetscomingfromtheWANsidewillbeltered.
•LANside-packetsfromtheLANsidewillbeltered.
Are :
• Ignored - Stop the packet and do not route it.
• Rejected - Return the rejected packet to the point of origin.
• Accepted - Pass the packet through.
• Destination IP Address-TheIPaddresstobeltered.
• Source IP Address-TheIPaddressdesignatedforltering.IfallIPaddressesmustbeltered,
leave this box blank.
Warning: If administrator selects packet from LAN is Ignored or Rejected, the administrator will
IP Filter
setting
Advanced Settings