Specifications
14
g) If the power cable or plugs are damaged, they must be replaced by the manufacturer or by an authorized service centre or
by a qualied person in order to prevent all risks. Using accessories that have not been recommended by the manufacturer may
cause res, electric shocks and personal injuries.
8. Figure B: make sure that children cannot play with the Hand Blender. Children are not aware that electrical appliances are
dangerous.
Place the Hand Blender on a at surface, making sure that the feet rest rmly on the at surface so that the Hand Blender is
stable. Do not put the Hand Blender on hot surfaces or near open ames (picture C).
9. Do not place kitchen utensils or other implements near the blade when the Hand Blender is on. Placing any utensil near
the blade, while the Hand Blender is running, may cause serious personal injury or irreparable damage to the Hand Blender.
10. Figure D: In order to ensure that the Hand Blender works properly, place it on a at surface, in a well-lit and hygienic room
near to a power socket. Keep the Hand Blender at least 10 cm (4 inches) away from the wall.
11. Unplug the plug (17) from the power socket when the Hand Blender is not in use, before removing any part, before cleaning
and before assembling and disassembling.
12. Figure E: Never touch the Hand Blender, for any reason, with wet or damp hands or with a damp or wet cloth. Always unplug
the appliance if it is not used and before cleaning. Never pull on the cable to remove the plug (17). Always remove the plug (17)
before removing and tting different parts. The Hand Blender must be cleaned with a dry or slightly damp non abrasive cloth,
adding a few drops of non-corrosive neutral detergent (never use solvents). Clean only and exclusively the outside surfaces
of the Hand Blender.
13. The Hand Blender must always be supervised while it is in use.
A
B
!
!
E
!
D