IMPORTANT NOTICES Dear Customer, thank you for choosing Vela, the blender from Casa Bugatti. Like any domestic appliance, this blender must be used with care and attention to prevent people getting injured and the blender getting damaged. BEFORE USING THE BLENDER FOR THE FIRST TIME, READ ALL THE INSTRUCTIONS ON INSTALLATION, USE AND MAINTENANCE AND THE SAFETY INSTRUCTIONS CAREFULLY. DO NOT USE THE BLENDER UNLESS YOU ARE THOROUGHLY FAMILIAR WITH THE INSTRUCTIONS.
Index Pag. 17 Specification Pag. “ Description of blender parts Pag. “ Blender controls Pag. 18-21 Important safeguards Pag. 22-24 Installation and starting up Pag. 24-27 Advice and recommendation on use Pag. 24-25 Pag. 25 Pag. 25-26 Pag. 26 Pag. 27 Pag. 27 Pag.
Specifications Power supply Power rating Dimensions Body Weight Length of power cable Incorporated thermal overload protection See rating plate underneath appliance See rating plate underneath appliance 17 x 22 h 42 cm approximately Cast zinc alloy and chromed ABS; glass jar 4.2 g approx 1.0 metres approximately Description of blender parts Ingredient measuring filler cup Lid Glass jar, 1.
IMPORTANT SAFEGUARDS READ ALL INSTRUCTIONS CAREFULLY. THE APPLIANCE MUST BE USED ONLY BY ADULTS WHO HAVE BEEN TRAINED IN ITS USE. KEEP THESE INSTRUCTIONS. 1.TO PREVENT SERIOUS INJURIES, ELECTRIC SHOCKS AND FIRE DO NOT IMMERSE CABLES, PLUGS, OR THE BLENDER ITSELF IN WATER OR OTHER LIQUIDS, EITHER PARTIALLY OR TOTALLY 2. The blender has been designed for HOUSEHOLD USE ONLY. Use the blender only for its intended use. Do not make any technical modifications. 3.
IMPORTANT SAFEGUARDS c)Do not place blender or cables on or near a hot gas range or electric hotplate, or in or near the oven. d) Do not use outdoors. e) Do not let the cables hang over the edge of the table or counter, or touch hot surfaces. f) Do not operate the blender after it has developed faults, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination or repair.
IMPORTANT SAFEGUARDS 9. Fig. D: In order to ensure that the blender works properly, place it on a level surface, in a well-lit and hygienic room near to a power socket. Keep the blender at least 10 cm (4 inches) away from the wall. 10. Remove the plug (7) from the power socket when the blender is not in use and before removing any part and before cleaning. 11. Fig. E: Never touch the blender, for any reason, with wet or damp hands or with a damp or wet cloth.
IMPORTANT SAFEGUARDS Important safeguards 23. The lid (2) and measuring filler cup (1) must always be in position when the blender is running. 24. Never use your hands to insert food. Use the measuring filler cup or appropriate utensils to pour or insert food into the jar. 25. . Do not attempt to remove the safety devices: you could cause serious personal injury or severely damage the blender. 26. Always start blending at a low speed and increase speed only if necessary. 27.
Installation and starting up The original package is designed for dispatch by post. Keep it in case you need to return the blender to the supplier. Before installing the blender strictly follow all points of the safety instructions specified above.
Installation and starting up How to assemble the blade unit (5): 1) Insert the seal (4) correctly into its seat on the blade unit (5) 4 5 2) Insert the complete blade unit (5) into the Glass Jar base (3) (image 1). To fix it turn the blade unit ( already composed with the rubber gasket (4) ), to the closed Padlock indicator direction, to achieve the complete locking position (image 2). The blender’s glass Jar (3) is now perfectly composed with the complete blade unit (5) (image 3).
Installation and starting up 5) Insert the lid (2) assembled with the filler cup (1) into the mouth of the assembled jar (3). 6) The blender has a safety lock that prevents the motor from being activated unless the blade unit (5) is perfectly assembled with the jar (3) before it is inserted into the motor base (6) 7) After making the above checks, and complying strictly with the safety instructions, connect to the mains power supply. Connecting to the power supply: electric current can kill.
Advice and recommendations on use 12) Do not unscrew the jar (3) from the blade unit (5) until you wish to remove the blade unit (5) for cleaning. If you loosen the jar (3) from the blade unit (5), the jar is no longer tight. Do not loosen the blade unit (5) from the jar (3) while there is any liquid in the blender as this will cause the liquid to leak out of the bottom of the jar (3). 13) The speed can be increased or decreased by the speed selector (12) even during the blending phase to suit requirements.
Advice and recommendations on use 4) Put into the glass jar (3) the ice cubes you intend to crush. Do not exceed the 1000ml (30 oz) level indicated on the glass jar. ATTENTION: if the glass jar is coming directly from the dishwasher be assured that the glass jar will be cooled to the room temperature in order to avoid thermal shock or breakage. 5) Insert the Plug (7) into the socket and turn the speed selector (12) on the ICE position.
Cleaning and maintenance ALWAYS UNPLUG THE BLENDER WHEN IT IS NOT IN USE AND BEFORE CLEANING. DO NOT UNPLUG THE BLENDER BY PULLING ON THE CABLE. DO NOT IMMERSE CABLES, PLUGS OR THE BLENDER IN WATER OR OTHER LIQUIDS, EITHER PARTIALLY OR TOTALLY. 1) The blender must be unplugged from the socket before it is cleaned. Do not pull on the cable to unplug. 2) You are advised to clean the blender immediately after use. 3) Never leave the motor base (6) or the cable with plug (7) wet.
Warranty 1) A warranty is deemed to be the replacement or repair free of charge of the parts making up the blender that were faulty at the time of purchase due to manufacturing faults. 2) In the case of irreparable or repeated faults which are due to manufacturing faults as above, at the manufacturer’s sole discretion, the machine will be replaced. 3) The warranty does not cover damage due to: a) improper or faulty use b) defect caused by accidental breakages or carelessness.
(DE) Alle Details des Textes wurden gewissenhaft geprüft. Das Unternehmen behält sich das Recht vor, Klarstellungen bereit zu stellen, falls im Text Druckfehler oder irreführender Informationen auftreten. Achtung: Das Unternehmen aktualisiert die Produktdetails in diesem Handbuch fortlaufend, einschließlich der Überarbeitung der technischen Daten, behält sich jedoch das Recht vor, Änderungen ohne vorherige Ankündigung vorzunehmen.