Manual

SECTION 5 - SPECIFICAT IONS
5-3
GENERAL DIMENSIONS 2145 2160 2180 2210
(Four wheel drive)
Height to the Top of Cab mm 3080 3080 3080 3080
(in) (121.3) (121.3) (121.3) (121.3)
Height to the Top of Exhaust mm 3159 3159 3159 3159
(in) (124.4) (124.4) (124.4) (124.4)
Minimum Width mm 2456 2456 2456 2456
(in) (96.7) (96.7) (96.7) (96.7)
Minimum Ground Clearance
Drawbar mm 471 471 471 471
(in) (18.6) (18.6) (18.6) (18.6)
Front Axle mm 432 432 432 432
(in) (17) (17) (17) (17)
Track Setting
Front Axle Minimum mm 1525 1525 1525 1525
(in) (60.0) (60.0) (60.0) (60.0)
Front Axle Maximum mm 2235 2235 2235 2235
(in) (88) (88) (88) (88)
Rear Axle Minimum mm 1530 1530 1530 1530
(in) (60.3) (60.3) (60.3) (60.3)
Rear Axle Maximum
(112″) H ub Out mm 3144 3046 3046 3046
(in) (123.8) (119.9) (119.9) (119.9)
(120″) Hub Out mm 3251 3251 3251
(in) (128.0) (128.0) (128.0)
Overall Length to End
of Lower Links
Unballasted mm 4997 4997 4997 4997
(in) (196.7) (196.7) (196.7) (196.7)
Ballasted
- Small Weights mm 5396 5396 5396 5396
(in) (212.4) (212.4) (212.4) (212.4)
- Large Weights mm 5639 5639 5639 5639
(in) (222.0) (222.0) (222.0) (222.0)
To Edge of Rear Tire mm 5273 5273 5273 5273
- Large Weights (in) (207.6) (207.6) (207.6) (207.6)
Wheelbase:
Standard Steer mm 3005 3005 3005 3005
(in) (118.3) (118.3) (118.3) (118.3)
UltraSteer mm 3115 3115 3115 3115
(in) (122.6) (122.6) (122.6) (122.6)
Turning radius:
Standard mm 3353 3353 3353 3353
Without Brakes (in) (132) (132) (132) (132)
UltraSteer
Without Brakes mm 2134 2134 2134 2134
(in) (84) (84) (84) (84)
NOTE: The above dimensions are based on standard tractors fitted with the tire sizes as shown:
Front - 4WD 16.9R28 16.9R28 16.9R28 16.9R28
Rear 480/80R42 480/80R42 480/80R42 480/80R42
(18.4R42) (18.4R42) (18.4R42) (18.4R42)