50” & 60” Snowblower TABLE OF CONTENTS DESCRIPTION PAGE Warranty ...................................................................... 1 Safety Instructions & Safety Sign Locations ................ 2 Operating Instructions.................................................. 3 Assembly Instructions .................................................. 5 50” & 60” Allied Snowblower Drawings ........................ 7 50” & 60” Allied Snowblower Parts List ........................
50” & 60” Allied Snowblower WARRANTY REGISTRATION AND POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper applications.
50” & 60” Allied Snowblower ALLIED SNOWBLOWER This manual is for both 50" and 60" snowblowers. When ordering parts, specify model number and serial number. Both snowblowers are the push type and will mount to a tractor with a category 1 three-point hitch or a category 1 Quick Hitch and 540 rpm PTO. Both snowblowers come with a hand crank chute control as standard. A hydraulic control is available as an option at extra cost.
50” & 60” Allied Snowblower OPERATING INSTRUCTIONS 1. Do not operate the blower in the fully raised position. The three-point hitch on some tractors raises high enough to cause the PTO shaft to bind. This can cause damage to the PTO shaft and/or to the hitch and pins. NOTE: PTO shaft angle should not exceed 20° for optimum performance and life. Damage may occur to PTO and/or snowblower if angle becomes more extreme. 2. Depth of cut can be partially controlled by tilting the blower forward or backward.
0” & 60” Allied Snowblower OPERATING INSTRUCTIONS – cont’d. 11. CAUTION: Always check to see that both ends of the PTO shaft are securely attached as per instructions every time you are preparing to use the snowblower. 12 When replacing bearings or tightening a loose bearing collar, always tighten collar in the direction of shaft rotation using a center punch or a similar tool. 13.
50” & 60” Allied Snowblower 50" & 60" SNOWBLOWER ASSEMBLY INSTRUCTIONS 1. Mount the discharge spout (#2) using the spout clamp (#3) bolted to the spout ring on the snowblower. Lubricate the spout ring and clamp. NOTE: A hydraulic cylinder and hose kit to control the spout deflector is available as an option. 2. Hitch Assembly: With right and left hitch tubes (#5 & #6) turned as shown in drawing, slide them into the sleeves welded to the main body. These tubes are adjustable to four different positions.
50” & 60” Allied Snowblower ASSEMBLY INSTRUCTIONS – cont’d. 4. Hydraulic Control Assembly: (option) a) Bolt the hydraulic swivel assembly (#21) to the back of the fan housing on the left side using ½” x 1 ¼” hex bolts, lock washers and hex nuts. b) Bolt the cylinder mounting bracket (#23) to the back of the fan housing on the right side using the same size hex bolts. c) Turn the spout forward and the center of the swivel arm in line with the spout center.
50” & 60” Allied Snowblower -7-
50” & 60” Allied Snowblower -8-
50” & 60” Allied Snowblower WHEN ORDERING PARTS Always give your dealer the Model, Color and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part.
50” & 60” Allied Snowblower 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 87553 81549 81569 81568 965630 965445 965642 907118 965505 965610 965637 965631 965844A 965826A 965507A 965613A 965632A 965069 961882 961676 961675A 901331 109343 84335 81678 81677 81676 812216 84498 81598 81615 981616 81213 81627 812364 965968A 965643A 960135A 81525 81545 81544 961658 9812434 965646 903523 1/2'' x 1 3/4'' Hex Bolt (pl) 5/16'' x 3/4'' Hex Bo
50” & 60” Allied Snowblower 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 961012 961876 901435 902477 812026 9812426 936402 9812487 967110 9812439 907133A 907134A 907138A 907139A 84336 812365 #16 Hair Pin Clip 1/2'' x 1 1/2'' Clevis Pin (pl) 1/2'' X 2 1/2'' Clevis Pin (pl) Skid Plate Weldt 5/16'' X 1'' Hex Bolt (pl) 1/4'' x 1 3/4'' Spring Pin (pl) PTO Safety Chain Narrow Rim Washer 1 1/4'' x 10ga (pl) Narrow Rim Washer 1 1/4'' x 14ga (pl) Narrow Rim Washer 1 1/4'' x 18ga (pl) Hitch Arm Weldt - L Hitch Arm
50” & 60” Allied Snowblower 50” & 60” ALLIED SNOWBLOWER PTO SHAFT - 12 -
50” & 60” Allied Snowblower 50'' Allied Snowblower PTO Parts List Item # Part # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 F512 936379 936380 936247 936168 936248 812363 936079 936381 936389 936382 936383 936384 936254 967179 967105 Description Shaft Complete Tractor Half of PTO (shear) Implement Half of PTO (clamp yoke) Shear Assembly Spring – Lock Kit (Collar, Spring, Ret.
50” & 60” Allied Snowblower 1.75 X 5 CYLINDER ASSEMBLY Item # Part # Description 1 2 3 24930 115367 112104 X2669 Cyl Complete Tube Weldt Shaft Weldt 1.
50” & 60” Allied Snowblower 50” & 60” ALLIED SNOWBLOWER BUNDLES QUANTITY BUNDLE NO.
