108” Allied Snowblower TABLE OF CONTENTS DESCRIPTION PAGE Warranty ......................................................................1 Safety Instructions & Safety Sign Locations ................2 Operating Instructions ..................................................3 Assembly Instructions ..................................................5 108” Allied Snowblower Drawings................................7 108” Snowblower Gearbox & Spouts Drawing .............9 108” Allied Snowblower Parts List....
108” Allied Snowblower WARRANTY POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months (90 days for commercial application) from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper applications.
108” Allied Snowblower SNOWBLOWERS This manual is for model #1080 snowblowers with a combination three point and quick coupler hitch. All model #1080 snowblowers use an open gear drive. The standard model is a push type which will mount to a tractor with 1000 rpm PTO only. This model uses a chain drive reducer in the welded gearbox assembly which runs in an oil bath. A direct drive 540 rpm model is also available. It is supplied with category 2 pins as well as conversion bushings to category 3.
108” Allied Snowblower OPERATING INSTRUCTIONS 1. Do not operate the blower in the fully raised position. The three-point hitch on some tractors raises high enough to cause the PTO shaft to bind. This can cause damage to the PTO shaft and/or to the hitch and pins. 2. Depth of the cut can be partially controlled by tilting the blower forward or backward. Adjust the top link of the tractor hitch so the snowblower is just slightly CAUTION: Excessive backward tilt tilted back when resting on the ground.
108” Allied Snowblower OPERATING INSTRUCTIONS – cont’d. 10. Lubrication: a) b) c) d) e) The spout clamps and rings should be periodically lubricated with gun grease. This is particularly important on the truckloader spout which turns harder than the standard spout due to the length and weight. PTO shaft universal joints and splined slide should be greased daily. Regularly oiling the chain will significantly increase the life of the chain.
108” Allied Snowblower ASSEMBLY INSTRUCTIONS 1. Hitch Assembly: With lower hitch tubes (#3) turned as shown in drawing, slide them into the sleeves welded to the main body. These tubes are adjustable to two different positions. The correct position for each individual tractor will be determined when mounting the snowblower on the tractor (see section 4). Start with the tubes pulled out to the last hole. These tubes are connected to the snowblower with a 1 ¼” x 5 ½” pin (#6) and a hair pin clip (#12).
108” Allied Snowblower ASSEMBLY INSTRUCTIONS - Cont'd. 4. Mounting Blower on Tractor: a) Mount the blower on a tractor with a category 2 or 3 standard hitch or a category 3 quick hitch. The hitch as two holes both at the top of the hitch and at each lift arm. When using a quick coupler, the pins must be in the inside set of holes. Use the outside set of holes with a standard threepoint hitch. The lift arm pins also have a narrow spacing for category 2 and a wide spacing for category 3.
108” Allied Snowblower 108” SNOWBLOWER -7-
8” Allied Snowblower -8-
108” Allied Snowblower 108” SNOWBLOWER GEARBOX & SPOUTS -9-
108” Allied Snowblower WHEN ORDERING PARTS Always give your dealer the Model, Color and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part.
108” Allied Snowblower 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 81549 81569 81568 965216 902902 965294A F9231 F9232 F9233 965280 965281A 965221A 965222 965282 965273 965224A 965225A 811751 81702 81701 81700 81552 812362 811792 965226 968807 965296 963030 984077 84270 F9241 965647 967451 967452 24930 967453 960913 961876 9812430 F9243 F9234 967471 811791 965304 965305 5/16'' X 3/4'' Hex Bolt (pl) 5/16'' Lock Washer (pl) 5/1
108” Allied Snowblower 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 965238 965239 81620 812364 965266 965267 965268 967431 905609 810149 905630 906497 965283 906498 906499 967375 906500 84050 985639 812365 965821 965284 965285 965286 965667 965288 965660 965290 965269 965270 965271 965275 965274 906496 965655 965295A 84299 965298A 965299 81638 812026 115370 905080 Cylinder Arm Hose Clamp 1/2'' X 1 1/4'' Hex Bolt (p
108” Allied Snowblower 117 118 119 120 121 122 123 124 125 126 127 128 115371 115369 811918 886786 902127 936402 967433 812482 84277 967164 967135 967474 84270 968898 81624 907590 3/8'' X 156'' Hose w/fittings 3/8 X 156 Hose 1/2 MNPT X 9/16 SWFJIC Elbow 90deg 9/16 SWMORB X 9/16 MJIC Elbow 90deg 1/4'' MNPT X 9/16'' MJIC 1/2'' x 1 3/4'' Gear Key (540 RPM) PTO Safety Chain 5/8'' x 3 1/4'' Hex Bolt (pl) 5/8'' Lock Nut (pl) 1/2'' x 1 1/2'' Hex Bolt (pl) Pound-In Grease Fitting 1 1/2'' x 10GA Narrow Rim Washe
108” Allied Snowblower 108” ALLIED SNOWBLOWER PTO - 14 -
108” Allied Snowblower 108'' SNOWBLOWER PTO SHAFT PARTS LIST Item # 1 2 3 4 5 6 7 8 9 10 11 12 13 Part # Description F9231 F9232 F9233 936413 936422 936414 936423 936429 936424 936428 936415 936199 936249 908890 908846 936197 906548 936426 936417 936418 936419 936425 936421 967433 812482 Standard Shaft (21 Spline, 1 3/8'') - 1000 RPM Optional Shaft (20 Spline, 1 3/4'') - 1000 RPM 540 RPM Shaft (6 Spline, 1 3/8'') Standard Shear Assembly (21 Spl, 1 3/8'') Shear Hub Only (21 Spl, 1 3/8'') Optional Shear
108” Allied Snowblower ALLIED SNOWBLOWER BUNDLES QUANTITY BUNDLE NO.
DIVISION LOCATIONS Farm King Division 301 Mountain Street S. Morden, MB R6M 1X7 Ph.: (204) 822-4467 Fax: (204) 822-6348 Allied Division 1201 Regent Ave. W. Box 1003 Winnipeg, MB R2C 3B2 Ph.: (204) 661-8711 Fax: (204) 654-2503 Inland Division 675 Washington Ave. Winnipeg, MB R2K 1M4 Ph: (204) 667-7854 Fax: (204) 669-2599 U.S.