OPERATOR AND PARTS MANUAL Rotary Tiller (25 Series) Model TL236, TL245, TL254 042014 6990633 (1-13) FK303 Rev 1 Printed in U.S.A.
Table of Contents - 25 Series Rotary Tiller TABLE OF CONTENTS Manufacturer’s Statement: For technical reasons, Buhler Industries Inc. reserves the right to modify machinery design and specifications provided herein without any preliminary notice. Information provided herein is of descriptive nature. Performance quality may depend on soil fertility, applied agricultural techniques, weather conditions and other factors. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents - 25 Series Rotary Tiller 2
Warranty Registration - 25 Series Rotary Tiller WARRANTY REGISTRATION FORM This form must be filled out by the dealer and signed by both the dealer and the customer at the time of delivery.
Warranty Registration - 25 Series Rotary Tiller 4
Introduction - 25 Series Rotary Tiller INTRODUCTION This Operator’s and Parts Manual was written to give the owner / operator instructions on the safe operation, maintenance and part identification of the Farm King equipment. READ AND UNDERSTAND THIS OPERATOR’S AND PARTS MANUAL BEFORE OPERATING YOUR FARM KING EQUIPMENT. If you have any questions, see your Farm King dealer. This manual may illustrate options and accessories not installed on your Farm King equipment. OWNER’S INFORMATION . . . . . . . . . .
Introduction - 25 Series Rotary Tiller 6
Introduction - 25 Series Rotary Tiller OWNER’S INFORMATION Serial Number Location Thank you for your decision to purchase a Farm King 25 Series Rotary Tiller. To ensure maximum performance of your equipment, it is mandatory that you thoroughly study the Operator and Parts Manual and follow the recommendations. Proper operation and maintenance are essential to maximize equipment life and prevent personal injury. Please enter the model and serial number in the space provided for easy reference.
Introduction - 25 Series Rotary Tiller EQUIPMENT IDENTIFICATION Component Location UPPER DRIVE SHAFT COVER PTO DRIVELINE SUPPORT CHAIN GEAR BOX DRIVE CHAIN COVER DRAG SHIELD MANUAL STORAGE DRAG SHIELD HEIGHT ADJUSTMENT CHAIN B-0205 UPPER THREE-POINT MOUNTING PIN GEARBOX PTO GUARD DECK ASSEMBLY LOWER THREE-POINT MOUNTING PIN LOWER THREE-POINT MOUNTING PIN SUPPORT STAND SKID SHOE SKID SHOE TINE B-0206 8
Introduction - 25 Series Rotary Tiller SHIPPING KIT AND BUNDLE NUMBERS The following is a list of shipping kits for this product and the Descriptions, Bundle Numbers and Quantities for each kit. DESCRIPTION BUNDLE NUMBER QUANTITY Deck Assembly F1617 1 PTO F0356 1 Deck Assembly F1618 1 PTO F0356 1 Deck Assembly F1619 1 PTO F0356 1 Deck Assembly F1617 1 PTO F0357 1 Deck Assembly F1618 1 PTO F0357 1 Deck Assembly F1619 1 PTO F0357 1 TL236 36 in.
Introduction - 25 Series Rotary Tiller 10
Safety - 25 Series Rotary Tiller SAFETY SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Safe Operation Is The Operator’s Responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Safe Operation Needs A Qualified Operator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Use Safety Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety - 25 Series Rotary Tiller 12
Safety - 25 Series Rotary Tiller SAFETY INSTRUCTIONS Safe Operation Needs A Qualified Operator Safe Operation Is The Operator’s Responsibility Safety Alert Symbol This symbol with a warning statement means: “Warning, be alert! Your safety is involved!” Carefully read the message that follows. The signal word CAUTION on the machine and in the manuals indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
Safety - 25 Series Rotary Tiller SAFETY INSTRUCTIONS (CONT’D) Use Safety Rules Transport Safety • Do not exceed 20 mph (32 kph). Reduce speed on rough roads and surfaces. Under no circumstances should young children be allowed to work with this equipment. • Comply with state and local laws governing highway safety and movement of machinery on public roads. • This equipment is dangerous to children and persons unfamiliar with its operation.
Safety - 25 Series Rotary Tiller Safety Rules For Power Take-Off (PTO) Driven Equipment • Keep bystanders clear of moving parts and the work area. Keep children away. • Keep PTO shields and all guards in place. Replace damaged or missing shields and guards before operating. • Use increased caution on slopes and near banks and ditches to prevent overturn. • • Follow warnings and instructions on machine signs (decals). Replace damaged or missing decals.
Safety - 25 Series Rotary Tiller FIRE PREVENTION Electrical Maintenance Check all electrical wiring and connections for damage. Keep the battery terminals clean and tight. Repair or replace any damaged part or wires that are loose or frayed. The machine and some equipment have components that are at high temperatures under normal operating conditions. The primary source of high temperatures is the engine and exhaust system.
Safety - 25 Series Rotary Tiller FIRE PREVENTION (CONT’D) Call Before You Dig Welding And Grinding Always clean the machine and equipment, disconnect the battery, and disconnect the wiring from the machine controls before welding. Cover rubber hoses, battery and all other flammable parts. Keep a fire extinguisher near the machine when welding. Have good ventilation when grinding or welding painted parts. Wear dust mask when grinding painted parts. Toxic dust or gas can be produced.
Safety - 25 Series Rotary Tiller SAFETY SIGNS (DECALS) Follow the instructions on all the Signs (Decals) that are on the equipment. Replace any damaged signs (decals) and be sure they are in the correct locations. Equipment signs are available from your Farm King equipment dealer.
Safety - 25 Series Rotary Tiller EQUIPMENT DECALS AND SIGNS Part Number 967388 NOTE: All safety related decals are shown in the Safety Signs Section. (See “SAFETY SIGNS (DECALS)” on page 18.) Check and replace any worn, torn, hard to read or missing decals on your equipment.
Safety - 25 Series Rotary Tiller SAFETY SIGN-OFF FORM Instructions are necessary before operating or servicing equipment. Read and understand the Operator’s and Parts Manual and safety signs (decals) on equipment. Follow warnings and instructions in the manuals when making repairs, adjustments or servicing. Check for correct function after adjustments, repairs or service. Untrained operators and failure to follow instructions can cause injury or death.
Operation - 25 Series Rotary Tiller OPERATION GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Pre - Operation Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Break - In Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Tractor Requirements . . . . . . . . . . . . . . . .
Operation - 25 Series Rotary Tiller 22
Operation - 25 Series Rotary Tiller GENERAL INFORMATION Pre - Operation Checklist Before operating the rotary tiller for the first time and each time thereafter, check the following items: 1. Lubricate the equipment per the schedule outline in the Maintenance Section. (See “SERVICE SCHEDULE” on page 42.) 2. Check the rotary tiller three-point mounts for damaged, loose or missing parts. Repair as needed before operation. 3. Use only a tractor of adequate power and weight to pull the machine. 4.
Operation - 25 Series Rotary Tiller 2. Check for loose fasteners and hardware. Tighten as required. Break - In Checklist Check the following mechanical items after 1 hour of operation and again after 10 hours of operation: 3. Check that the PTO driveline telescopes easily and turns freely. 4. Check condition of tines and bearings. 5. Check gearbox oil level. Fill as required. (See “LUBRICATION” on page 43.) 6. Check the rotor shaft and tines.
Operation - 25 Series Rotary Tiller Tractor Requirements • • • • Entering And Leaving The Operator’s Position Do NOT exceed 540 RPM PTO. Keep PTO shields and all guards in place. Keep away from moving parts. Keep bystanders away. ROTARY TILLER MODEL TRACTOR HP TL236 12 - 18 TL245 14 - 22 TL254 18 - 25 Follow the instructions in your tractor’s operation manual for the correct procedure.
Operation - 25 Series Rotary Tiller Figure 5 INITIAL SET-UP Assembly NOTE: The rotary tiller is shipped with the skid shoes mounted on the inside of the deck assembly. The skid shoes must be removed and reinstalled on the outside of the deck assembly (if required). 2 3 Procedure Figure 4 1 B-0251 1 Align the right skid shoe (Item 1) [Figure 5] with the mounting holes in the deck assembly. Install the bolt (Item 2) [Figure 5] through the skid shoe and deck assembly. Install nut (do not tighten).
Operation - 25 Series Rotary Tiller Connecting The Rotary Tiller To The Tractor Move the tractor into position in front of the rotary tiller. Always inspect the tractor’s three-point hitch and rotary tiller three-point mounts before connecting. See the tractor’s owner’s manual. Move the tractor backwards, aligning the tractor’s threepoint hitch and rotary tiller three-point mounts.
Operation - 25 Series Rotary Tiller Connecting The Rotary Tiller Using A Quick Hitch Figure 8 3 2 • Align the lower left link arm with the mounting pin. • Slide the ball over the pin and install the lynch pin. • Use the screw jack on the right lift arm to align the ball with the pin. • Slide the ball over the mounting pin and install the lynch pin. • Level the frame using the screw jack. • Remove the retainer and pin from the mast. • Align top link using the turnbuckle.
Operation - 25 Series Rotary Tiller Connecting The PTO Driveline Figure 9 NOTE: The PTO shafts are shipped with the slip clutch (if equipped) disengaged. Engage the slip clutch. (See “Engage The Clutch” on page 49.) 1 2 AVOID INJURY OR DEATH Warnings on the machine and in the manuals are for your safety. Failure to obey warnings can cause serious injury or death. NOTE: Clean and grease tractor’s PTO shaft and PTO driveline coupling each time driveline is connected.
Operation - 25 Series Rotary Tiller PTO Driveline PTO Driveline Bottoming Out Check PTO Driveline Length Check Stop the engine and leave the operator’s position. (See “Leaving The Operator’s Position” on page 25.) NOTE: Due to variations in distances between tractor PTO shafts and implement input shafts, drivelines may need to be shortened or a longer shaft may be required. When fitting the implement to the tractor, the PTO driveline, with telescoping sections, must be inspected.
Operation - 25 Series Rotary Tiller Reducing The PTO Driveline Length Figure 11 Stop the engine and leave the operator’s position. (See “Leaving The Operator’s Position” on page 25.) Tiller PTO Shaft 2 Make sure the PTO driveline and all rotating components have come to a complete stop before leaving the operator’s position. X 1 X AVOID INJURY OR DEATH • • • • • • • • • Do NOT exceed the rated implement PTO speed. Stay clear of rotating driveline. Keep bystanders away.
Operation - 25 Series Rotary Tiller PTO Driveline Engagement Check Stop the engine and leave the operator’s position. (See “Leaving The Operator’s Position” on page 25.) Make sure the PTO driveline and all rotating components have come to a complete stop before exiting the compact tractor. 3. Multiply the retracted driveline length by 1.667 to determine the PTO driveline Maximum Operating Length. (i.e.: 25.5 in. (647,7 mm) x 1.667= 42.5 in. (1079,7 mm) Maximum Operating Length). 4.
Operation - 25 Series Rotary Tiller Adjusting Skid Shoe Height NOTE: The following instructions may not show your exact skid shoes as they appear but the procedure is the same. Skid Shoe Settings Decrease Working Depth - Lower skid shoes. AVOID INJURY OR DEATH Before you leave the operator’s position: • • • • • Always park on a flat level surface. Place all controls in NEUTRAL. Engage the park brake. Stop the engine and remove the key. Wait for all moving parts to stop.
Operation - 25 Series Rotary Tiller Adjusting Drag Shield Figure 16 3 AVOID INJURY OR DEATH Before you leave the operator’s position: • • • • • 2 Always park on a flat level surface. Place all controls in NEUTRAL. Engage the park brake. Stop the engine and remove the key. Wait for all moving parts to stop. 1 B-0223 Park the tractor and implement on a flat level surface. Stop the engine and leave the operator’s position. (See “Leaving The Operator’s Position” on page 25.
Operation - 25 Series Rotary Tiller ROTARY TILLER OPERATION Operating The Rotary Tiller • Read operator and parts operating the implement. manual before • Do not permit riders. • Keep all guards and shields in place. • Keep hands, feet, clothing and hair away from moving parts. • Stop engine, set brake, remove key and wait for all moving parts to stop before servicing, adjusting, repairing and unplugging. • Remove bystanders, especially children, before starting or while operating.
Operation - 25 Series Rotary Tiller Connect the rotary tiller to the tractor. (See “Connecting The Rotary Tiller To The Tractor” on page 27.) Place the support stand into the operating position. (See “Support Stand” on page 34.) Adjust skid shoe height. (See “Adjusting Skid Shoe Height” on page 33.) Adjust drag shield. (See “Adjusting Drag Shield” on page 34.) Start driving forward at the desired speed. Continue operating the tractor and rotary tiller until the desired work area is complete.
Operation - 25 Series Rotary Tiller TRANSPORTING Transporting Guidelines Requirements The ratio of the tractor / tow vehicle weight to the loaded equipment weight plays an important role in defining acceptable travel speed. Comply with federal, state, local and provincial laws regarding the transport of farm equipment on public roadways. TRAVEL SPEED - Acceptable travel speed. WEIGHT RATIO - Weight of fully equipped or loaded implement(s) relative to weight of tractor / tow vehicle.
Operation - 25 Series Rotary Tiller 38
Maintenance - 25 Series Rotary Tiller MAINTENANCE TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 SERVICE SCHEDULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Maintenance Intervals . . . . . . . .
Maintenance - 25 Series Rotary Tiller 40
Maintenance - 25 Series Rotary Tiller TROUBLESHOOTING Chart Instructions are necessary before operating or servicing equipment. Read and understand the Operator and Parts Manual and safety signs (decals) on equipment. Follow warnings and instructions in the manuals when making repairs, adjustments or servicing. Check for correct function after adjustments, repairs or service. Untrained operators and failure to follow instructions can cause injury or death.
Maintenance - 25 Series Rotary Tiller SERVICE SCHEDULE Maintenance Intervals Maintenance work must be done at regular intervals. Failure to do so will result in excessive wear and early failures. The service schedule is a guide for correct maintenance of the Rotary Tiller. Instructions are necessary before operating or servicing equipment. Read and understand the Operator and Parts Manual and safety signs (decals) on equipment.
Maintenance - 25 Series Rotary Tiller LUBRICATION Locations Recommendations Always use a good quality multi-purpose / lithium base grease when lubricating the equipment. Do not over-grease bearings. Greasing too often can damage seals and lead to premature bearing failure. • Always use a hand-held grease gun. • Clean fitting before greasing, to avoid injecting dirt and grit. • Replace and repair broken fittings immediately. • If fittings will not take grease, remove and clean thoroughly.
Maintenance - 25 Series Rotary Tiller Lubricate the following grease locations EVERY 20 HOURS: Lubricate the following grease locations EVERY 40 HOURS: NOTE: The following images may not show your exact PTO driveline as it appears but the procedure is correct. Figure 21 2 Figure 19 1 2 2 8-10 2 1 B-0231 1 2 1 B-0002 Apply two pumps of grease to the guard bushings (Item 1) [Figure 19]. Apply two pumps of grease to the chain case drive bearing (Item 1) [Figure 21].
Maintenance - 25 Series Rotary Tiller Lubricate the following grease locations EVERY 80 HOURS: Figure 23 3 1 B-0210 Apply 3 pumps of grease to the rotor bearing (Item 1) [Figure 23] (both ends). Figure 24 10 1 2 B-0231 Apply ten pumps of grease to the chain case (Item 1) [Figure 24].
Maintenance - 25 Series Rotary Tiller TINE REPLACEMENT Stop the engine and leave the operator’s position. (See “Leaving The Operator’s Position” on page 25.) Tine Removal Fully raise and lock the drag shield in the raised position. Figure 25 AVOID INJURY OR DEATH Before you leave the operator’s position: • Always park on a flat level surface. • Place all controls in NEUTRAL. • Engage the park brake. • Stop the engine and remove the key. • Wait for all moving parts to stop.
Maintenance - 25 Series Rotary Tiller GEARBOX Park the tractor and implement on a flat level surface. Oil Change Fully raise the rotary tiller. Stop the engine and leave the operator’s position. (See “Leaving The Operator’s Position” on page 25.) Make sure the PTO driveline and all rotating components have come to a complete stop before leaving the operator’s position. AVOID INJURY OR DEATH Figure 26 Before you leave the operator’s position: • Always park on a flat level surface.
Maintenance - 25 Series Rotary Tiller SHEAR PIN Figure 27 Shear Pin Replacement (If Equipped) Park the tractor and implement on a flat level surface. Fully lower the rotary tiller. Stop the engine and leave the operator’s position. (See “Leaving The Operator’s Position” on page 25.) Make sure the PTO driveline and all rotating components have come to a complete stop before leaving the operator’s position. 1 Disconnect the PTO driveline.
Maintenance - 25 Series Rotary Tiller SLIP CLUTCH Slip Clutch Maintenance Slip Clutch Lining Replacement NOTE: Before first use or after storage of more than one month, the clutch should be checked. NOTE: The PTO shafts are shipped with the slip clutch disengaged. 1. Turn the four socket set screws on the inside of the clutch assembly all the way in to disengage the clutch.
Maintenance - 25 Series Rotary Tiller SAFETY SIGN (DECAL) INSTALLATION STORAGE AND RETURN TO SERVICE Procedure Storage Sometimes it may be necessary to store your Farm King rotary tiller for an extended period of time. Below is a list of items to perform before storage. When replacing safety signs (decals), temperature must be above 10° C (50° F). the • Remove all portions of the damaged safety sign (decal). DO NOT permit children to play on or around the stored machine.
Parts Identification - 25 Series Rotary Tiller PARTS IDENTIFICATION GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 UPPER SHAFT GROUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 DECK GROUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 ROTOR GROUP . . . . . . . . . .
Parts Identification - 25 Series Rotary Tiller 52
Parts - 25 Series Rotary Tiller GENERAL INFORMATION The parts identification section list descriptions, part numbers and quantities for the 25 Series Rotary Tillers. Contact your Farm King dealer for additional rotary tiller parts information.
Parts - 25 Series Rotary Tiller CHAIN DRIVE GROUP 5 4 6 7 17 8 9 2 3 18 16 15 19 11 15 10 8 14 13 1 12 54 B-0235
Parts - 25 Series Rotary Tiller ITEM PART NUMBER DESCRIPTION QTY 1 903209 CHAIN GUARD 1 2 TG101 GASKET, CHAIN COVER 1 3 81525 BOLT, 1/4” x 3/4” HEX PLATED 18 4 84498 LOCK NUT, 1/4” PLATED 18 5 967164 GREASE ZERK, DRIVE - IN 1 6 914332 SPACER, TOP SPROCKET 1 7 906845 SPROCKET, H80B11 1 8 912301557 RETAINER RING, 1 5/8” 2 9 913835 ROLLER CHAIN, 80H x 42 PITCHES 1 10 913836 SPROCKET, H80B17 1 11 959220 SPACER, TOP SPROCKET 1.07” LG x 1.645” ID x 0.
Parts - 25 Series Rotary Tiller DECK GROUP 22 21 4 3 2 5 1 10 11 12 6 14 13 15 7 16 18 20 19 17 9 16 8 B-0237 56
Parts - 25 Series Rotary Tiller ITEM PART NUMBER DESCRIPTION QTY 1 912301660 SNAPPER CLIP 1 2 913990 STAND, WELDMENT 1 3 909277 MANUAL HOLDER, 3 1/2” x 12” 1 4 913951 SHOE, DEPTH GAUGE, RH 1 5 914232 DRAG GUARD, WELDMENT 40” 1 913910 DRAG GUARD, WELDMENT 48” 1 913999 DRAG GUARD, WELDMENT 60” 1 6 86170 BOLT, 3/8” x 1” HEX GRADE 5 PLATED 1 7 982000471 CHAIN, 1/4” x 14 LINK 1 8 84000 WASHER, FLAT 7/16” PLATED 2 9 812363 LOCK NUT, 3/8” PLATED 1 10 909710 HINGE RO
Parts - 25 Series Rotary Tiller DECK GROUP 12 13 17 5 3 2 16 10 15 11 10 14 9 5 18 5 8 7 3 4 6 2 1 B-0238 58
Parts - 25 Series Rotary Tiller ITEM PART NUMBER DESCRIPTION QTY 1 914258 GUARD, UPPER SHAFT 40” TILLER 1 914257 GUARD, UPPER SHAFT 48” TILLER 1 914242 GUARD, UPPER SHAFT 60” TILLER 1 2 81569 LOCK WASHER, 5/16” PLATED 8 3 81549 BOLT, HEX 5/16” x 3/4” PLATED 8 4 81553 BOLT, HEX 5/16” x 1 1/2” PLATED 1 5 81546 WASHER, FLAT 5/16” PLATED 6 6 913980 U-BOLT, 0.62” x 2.19” x 3.
Parts - 25 Series Rotary Tiller ROTOR GROUP 5 2 3 1 4 6 4 12 15 7 2 8 11 13, 14 9 10 B-0234 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 PART NUMBER 967354 967355 914330 84299 912300131 812482 983006300 967353 967363 TG103 912303601 982006422 812765 9812767 967483 14 967484 15 812763 60 DESCRIPTION ROTOR SHAFT, WELDMENT 44.25” ROTOR SHAFT, WELDMENT 52.25” ROTOR SHAFT, WELDMENT 60” BOLT, HEX 5/8” x 2” GRADE 5 PLATED BEARING, 2 BOLT FLANGE 1 1/4” LOCK NUT, 5/8” PLATED BEARING COVER, WELDMENT 0.3.
Parts - 25 Series Rotary Tiller PTO DRIVELINE (SLIP CLUTCH) 5 2 6 4 3 1 B-0240 ITEM 1 2 3 4 5 6 PART NUMBER F0356 907290 920 - 004 920 - 003 930 - 109 936351 DESCRIPTION PTO DRIVELINE, SLIP CLUTCH, COMPLETE YOKE, #2 / S2 / G2 RT BALL 1 3/8” Z6 (R07) YOKE, #2 OUTER TUBE YOKE, #2 INNER TUBE FLEXIBLE ROLL PIN, #1, 8 x 45 MM FLEXIBLE ROLL PIN, #3/4, 8 x 55 MM QTY 1 1 1 1 1 1 PTO SHIELD (SLIP CLUTCH) 3 4 1 2 B-0241 ITEM 1 2 3 4 PART NUMBER 920 - 013 920 - 015 936300 936402 DESCRIPTION OUTER SHI
Parts - 25 Series Rotary Tiller PTO SLIP CLUTCH 2 1 3 B-0243 ITEM PART NUMBER DESCRIPTION QTY 1 966223 BUSHING, FF / FT / FV / FR CLUTCH 1 2 936340 CLUTCH LINING, FD1 / FT - FV22 2 3 936512 SET SCREW, M10 x 25 x 1.5 (cl10.
Parts - 25 Series Rotary Tiller PTO DRIVELINE (SHEAR PIN) 6 2 5 3 7 4 B-0244 1 ITEM 1 2 3 4 5 6 7 PART NUMBER F0357 920 - 002 907290 920 - 004 930 - 109 936351 920 - 003 DESCRIPTION PTO DRIVELINE, SLIP CLUTCH, COMPLETE CROSS KIT, #2 YOKE, #2 / S2 1 3/8” Z6 BALL YOKE, #2 OUTER TUBE FLEXIBLE ROLL PIN, #1, 8 x 45 MM FLEXIBLE ROLL PIN, #3/4, 8 x 55 MM YOKE, #2 INNER TUBE QTY 1 1 1 1 1 1 1 PTO SHIELD (SHEAR PIN) 3 4 1 2 B-0245 ITEM 1 2 3 4 PART NUMBER 920 - 013 920 - 015 936300 936402 DESCRIPT
Parts - 25 Series Rotary Tiller PTO SHEAR PIN 1 B-0247 ITEM PART NUMBER DESCRIPTION QTY 1 920 - 020 SHEAR PIN & NUT 1 64
Specifications - 25 Series Rotary Tiller SPECIFICATIONS SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 HARDWARE TORQUE VALUES . .
Specifications - 25 Series Rotary Tiller 66
Specifications - 25 Series Rotary Tiller SPECIFICATIONS Dimensions B A C DESCRIPTION B-0249 TL236 TL245 TL254 34 in. (866 mm) 34 in. (866 mm) 34 in. (866 mm) Overall Width (B) 46.5 in. (1181 mm) 54.5 in. (1384,3 mm) 66.5 in. (1689 mm) Tillage Width (C) 36 in. (914,4 mm) 45 in. (1143 mm) 54 in. (1371,6 mm) DESCRIPTION TL236 TL245 TL254 Tractor HP 12 - 18 14 - 22 18 - 25 Weight (approximate) 385 lb. (175 kg) 418 lb. (190 kg) 477 lb.
Specifications - 25 Series Rotary Tiller HARDWARE TORQUE VALUES Metric Chart NOTE: Do not use the values listed in the charts if a different torque value or tightening procedure is specified in this manual for a specific application. Torque values listed are for general use only. Use the following charts to determine the correct torque when checking, adjusting or replacing hardware. Torque values are listed in newton-meters (inch* or foot pounds) for normal assembly applications. Nominal Size Class 5.
Specifications - 25 Series Rotary Tiller HARDWARE TORQUE VALUES (CONT’D) Imperial Chart NOTE: Do not use the values listed in the charts if a different torque value or tightening procedure is specified in this manual for a specific application. Torque values listed are for general use only. Use the following charts to determine the correct torque when checking, adjusting or replacing hardware. Torque values are listed in newton-meters (inch* or foot pounds) for normal assembly applications.
Specifications - 25 Series Rotary Tiller HYDRAULIC CONNECTION SPECIFICATIONS O-Ring Fitting (Straight Thread) Lubricate the O-ring before installing the fitting. Loosen the jam nut and install the fitting. Tighten the jam nut until the washer is tight against the surface. Port Seal (O-ring Boss) Fitting Figure 31 Port Seal And O-ring Boss Tightening Torque Tubeline O.D.
Warranty - 25 Series Rotary Tiller WARRANTY WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty - 25 Series Rotary Tiller 72
Warranty - 25 Series Rotary Tiller WARRANTY Limited Warranty BASE LIMITED WARRANTY Farm King provides this warranty only to original retail purchasers of its products. Farm King warrants to such purchasers that all Farm King manufactured parts and components used and serviced as provided for in the Operator’s Manual shall be free from defects in materials and workmanship for a period following delivery to the original retail purchaser of one (1) year.
Warranty - 25 Series Rotary Tiller Limited Warranty (Continued) WARRANTY REQUIREMENTS To be covered by warranty, each new product must be registered with Farm King within thirty (30) days of delivery to original retail purchaser.
Alphabetical Index - 25 Series Rotary Tiller ALPHABETICAL INDEX DECK GROUP . . . . . . . . . . . . . . . . . . . . . . . 56 EQUIPMENT DECALS AND SIGNS . . . . . . 19 EQUIPMENT IDENTIFICATION . . . . . . . . . . 8 FIRE PREVENTION . . . . . . . . . . . . . . . . . . . 16 GEARBOX . . . . . . . . . . . . . . . . . . . . . . . . . . 47 GENERAL INFORMATION . . . . . . . . . . . . . 23 GENERAL INFORMATION . . . . . . . . . . . . . 53 HARDWARE TORQUE VALUES . . . . . . . . .
Alphabetical Index - 25 Series Rotary Tiller 76
www.farm-king.com 301 Mountain Street South Morden, Manitoba Canada R6M 1X7 Toll Free: 1-888-FK-80001 E-mail: info@buhler.com www.farm-king.com Equipment shown is subject to change without notice. ©2014 Buhler Trading Inc.
