Cultivator TABLE OF CONTENTS DESCRIPTION PAGE WARRANTY................................................................ 1 INTRODUCTION ......................................................... 2 SAFETY....................................................................... 3 Safety ..................................................................... 3 General Safety ....................................................... 4 Start-up Safety .......................................................
Cultivator WARRANTY POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months (90 days for commercial application) from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper applications.
Cultivator INTRODUCTION The Buhler Farm King Cultivator features a solid welded frame construction with 2” x 2” x .250 wall tubing. There is a simple one bolt shank allowing for easy spacing adjustment. “S” tines are forged steel and feature reversible points. Optional gauge wheels and a 7” sweep are also available. This product is Quick Hitch compatible. Keep this manual handy for frequent reference.
Cultivator SAFETY Remember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenance procedures and follows all the safety precautions. Most accidents can be prevented. Do not risk injury or death by ignoring good safety practices. The alert symbol is used throughout this manual.
Cultivator GENERAL SAFETY INSTRUCTIONS Have a first-aid kit available for use and know how to use it. Have a fire extinguisher available, stored in a highly visible location, and know how to use it. Wear appropriate protective gear.
Cultivator SERVICE AND MAINTENANCE SAFETY Stop engine, set brake, remove ignition key, and wait for all moving parts to stop before servicing, adjusting, repairing, or unplugging. Support the equipment with blocks or safety stands before working beneath it. Follow good shop practices including: - keep service area clean and dry - be sure electrical outlets and tools are properly grounded - use adequate light for the job Use only tools, jacks, and hoists of sufficient capacity for the job.
Cultivator ASSEMBLY S-TINE SPACING Each cultivator main frame is divided up into 3 sections by two braces. Space tines equally within these sections.
Cultivator OPERATION THEORY OF OPERATION REVERSIBLE POINT REPLACEMENT OR REVERSAL: 1. 2. 3. 4. 5. 6. Raise the Cultivator off the ground. Securely block up the frame Remove the Plow Bolts as required. If the top side of the reversible point has not been used, reverse and reattach. If it has been used, replace reversible point. Install plow bolts and re-tighten. Replace points if the tips are badly worn. The plow bolts should also be replaced if the heads become badly worn.
Cultivator MAINTENANCE 8
Cultivator 9
Cultivator WHEN ORDERING PARTS Always give your dealer the Model, Color and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part.
Cultivator SHIPPING KIT AND BUNDLE NUMBERS The following is a list of Kit Numbers for this product and the Bundle Numbers, Descriptions, and Quantities for each Kit. QUANTITY BUNDLE NO.
Cultivator SHIPPING KIT AND BUNDLE NUMBERS – cont’d. Y847FC 84” CULTIVATOR w/gauge wheel and sweeps 1 1 1 1 1 1 F12 F0351 F0374 F6516 F0381 F6591 Gauge Wheel Hitch Frame 84” Tines Carton of Parts 7” Sweeps The following is a list of options available for the Kits listed above.
NOTES
NOTES
NOTES
DIVISION LOCATIONS Farm King Division 301 Mountain Street S. Morden, MB R6M 1X7 Ph.: (204) 822-4467 Fax: (204) 822-6348 Allied/Inland Division 1260 Clarence Avenue Winnipeg, MB R3T 1T2 Ph.: (204) 284-6100 Fax: (204) 477-2325 B.I.I. Division 1330 43rd Street N.W. Fargo, ND 58102 Ph: (701) 282-7014 Fax: (701) 282-5865 CANADIAN WAREHOUSES U.S.