Owner's Manual

Halogen Bulbs
Headlamp Bulb Replacement
For the type of bulb, see the Index under "Replacement
Bulbs."
1. Turn the bulb assembly counterclockwise 1/6 turn,
pressing in firmly, until the flanges align with the
slots in
the retainer ring.
2. Pull out the bulb assembly.
3. Disconnect the bulb base from the wiring harness by
lifting the plastic locking tab.
To replace the bulb
assembly:
1.
2.
Snap a new bulb into
the wiring harness
(A).
Make sure the locking
tab
(B) is over the lock
(C).
Install the bulb
assembly by putting the
small tab
(D) in the
small notch in the
retainer ring
(E).
3. Turn the bulb assembly 1/6 turn clockwise to lock it
in place.
232