Owner's Manual
Table Of Contents
- Table of Contents
- How to Use this Manual
- Seats and Restraint Systems
- Seats and Seat Controls
- Head Restraints
- Safety Belts
- How to Wear Safety Belts Properly
- Lap-Shoulder Belt
- Supplemental Restraint System
- Safety Belt Use During Pregnancy
- Children
- Smaller Children and Babies
- Child Restraints
- Larger Children
- Safety Belt Extender
- Checking Your Restraint System
- Replacing Safety Belts After a Crash
- Features and Controls
- Comfort Controls and Audio Systems
- Your Driving and the Road
- Problems on the Road
- Service and Appearance Care
- Maintenance Schedule
- Customer Assistance Information
- Index
Program
Previous
To
go from one side
of
the
tape
to
the other, press the
PROG button. The PROG button will also stop REV,
FWD, PREV or NEXT and play the tape.
Cr02
This button sets the tape bias. When playing high bias
chrome
or
metal tapes marked Cr02, press the button to
turn
on the Cr02. CrO2 will appear in the display. When
playing standard bias tapes, press again to turn off the
Cr02.
Reverse
To
rapidly reverse
the
tape, press
REV
and the tape will
rapidly reverse to the beginning or
until
you
press REV
or the PROG button again. The radio
will
play during
reverse.
Forward
To
rapidly advance the tape, press
FWD
and
the
tape
will
rapidly go forward to the end of the tape or
until
you press
PROG
or the
FWD
button again. The radio
will
play during forward.
To
hear a passage on the tape that has just played, press
PREV and the tape
will
back up and stop, at either the
first 4-second quiet spot
in
the tape, or when you press
PROG or PREV again.
Next
To go directly to the next selection on the tape, press
NEXT.
A
4-second quiet interval must be present for the
tape
to
stop. Pressing PROG or NEXT again will play
the tape.
Eject
To remove or stop the tape and switch
to
radio, press the
EJECT button.
Stop-Play
To
immediately switch from tape to radio, press
the
ST-PL
button and the radio will resume playing the
station that was tuned
in
when
you
inserted a tape.
Pressing ST-PL again
will
allow the tape to resume
where
it
stopped.
150