Owner's Manual

Personal Choice Programming
If your vehicle is equipped with remote keyless entry,
you can program the memory door locks feature to
change to the following modes:
Mode
0
1
2
3
Operation
No automatic door lock or unlock.
All doors automatically lock when
shifted out of PARK
(P). No automatic
door unlock.
All doors automatically lock when
shifted out of PARK
(P). Only the
driver’s door automatically unlocks
when shifted into PARK (P).
All doors automatically lock when
shifted out of PARK (P). All doors
automatically unlock when shifted into
PARK
(P).
Vehicles are delivered programmed in Mode 3.
Use the following procedure to change modes:
1. Close all doors and turn the ignition on. Keep all
doors closed throughout this procedure.
2. Press and hold the driver’s power door lock switch
through Step
4.
3. Press the LOCK button on the Remote Keyless Entry
transmitter. The automatic door locks will remain in
the current mode.
4. Press the LOCK button on the transmitter again.
Each time the transmitter’s LOCK button is pressed,
the mode will advance by one, going from 3 to 0 to
1, etc.
5. Release the power door lock switch. The automatic door
locks
will remain in the most recent mode selected.
2-6