Owner`s manual

Using Cruise Control on Hills
How well your cruise control will work on hills depends
upon your speed, load and the steepness
of the hills.
When going up steep hills, you may have to step on the
accelerator pedal to maintain your speed. When going
downhill,
you may have to brake or shift to a lower gear
to keep your speed down.
Of course, applying the brake
takes you out of cruise control. Many drivers find this to
be too much trouble and don’t use cruise control on
steep hills.
Ending Cruise Control
There are two ways to turn off the cruise control:
Step lightly on the brake pedal, OR
0 Move the cruise switch to OFF.
Erasing Speed Memory
When you turn off the cruise control or the ignition,
your cruise control set speed memory
is erased.
Exterior Lamps
The headlamp switch is located on the left side of the
instrument panel.
0 Turn the hob clockwise to the middle PAX
position to turn on the parking lamps, taillamps,
license plate lamp and the instrument panel lighting.
The headlamps will remain
off.
0 Turn the knob to LIGHTS to tum on your headlamps.
Turn the knob counterclockwise to tum the lamps off.
2-39