Owner`s manual
Jjusting the Speakers
BAL:
Press
this
knob lightly
so
it extends. Turn the knob
to move the sound to the left or right speakers. The middle
position balances the sound between the speakers.
FADE:
Press
this
knob lightly
so
it extends. Turn the
knob to move the sound to the &ont or rear speakers. The
middle position balances the sound between the speakers.
Push these knobs back into their stored positions when
you’re not using them.
Playing
a
Cassette Tape
The longer side with the tape visible should face to the
right. If the ignition and the radio are on, the tape can be
inserted and will begin playing. If you hear nothing or
hear a garbled sound, the tape may not be
in
squarely.
Press EJECT to remove the tape and start over.
While the tape is playing, use the
VOLUME,
FADE,
BAL,
BASS
and TREB controls just as you do for the
radio. Other controls may have different functions when
a tape is inserted. The display will show an arrow to
show which side of the tape is playing. If you want to
insert a tape when the ignition or radio is off, first press
EJECT or RECALL.
Your tape bias is set automatically.
If
E
and a number appear on the radio display, the tape
won’t play because of an error.
E10:
The tape is tight and the player can’t
turn
the tape hubs. Remove the tape. Hold the tape with
the open end down and
try
to turn the right hub
counterclockwise with a pencil. Turn the tape over
and repeat. If the hubs do not
turn
easily, your tape
may be damaged and should not be used in the
player. Try
a
new tape to make sure your player is
working properly.
Ell:
The tape is broken. Try a new tape.
If
any
error occurs repeatedly or if
an
error can’t be
corrected, please contact your dealer.
If
your radio
displays
an
error number, write it down and provide it to
your dealer when reporting the problem.
PREV
(1):
Press
this
button to search for the previous
selection on the tape. Your tape must have at least
three seconds
of
silence between each selection for
PREV to work. The sound will mute
while
seeking.
NEXT
(2):
Press this button to search for the next
selection on the tape.
Your
tape must have at least
three seconds of silence between each selection for
NEXT
to work. The sound will mute while seeking.
3-14