Owner`s manual
Adjusting
the Speakers
BAL:
Press
this
knob lightly
so
it extends.
Turn
the knob
to move the sound to
the
left
or right speakers. The middle
position balances the sound between the speakers.
FADE:
Press this knob lightly
so
it extends. Turn the
knob to move the sound to the front or rear speakers.
The middle position balances the sound between
the speakers.
Push these knobs back into their stored positions when
you’re not using them.
Playing a Cassette Tape
The longer side with the tape visible should face to the
right.
If
the ignition and the radio are on, the tape can be
inserted and will begin playing. If you hear nothing or
hear a garbled sound the tape may not be in squarely.
Press EJECT
to
remove the tape and start over.
While the tape is playing, use the VOLUME, FADE,
BAL,, BASS and
TREE3
controls just as you do for the
radio. Other controls may have different functions when
a tape
is
inserted. The display will show an arrow to
show which side of the tape is playing.
If
you want to insert a tape when the ignition or radio is
off, first press EJECT or
RECALL.
Your tape bias
is
set automatically.
If
E and
a
number appear on the radio display, the tape
won’t play because of an error.
0
0
E10:
The tape
is
tight and the player can’t turn the
tape hubs. Remove the tape. Hold the tape with the
open end down and try to turn the right hub
counterclockwise with a pencil. Turn the tape over
and repeat.
If
the hubs do not turn easily, your tape
may be damaged and should not be used
in
the
player. Try a new tape to make sure your player
is
working properly.
Ell:
The tape is broken. Try a new tape.
If
any
error occurs repeatedly or if an error can’t be
corrected, please contact your dealer.
If
your radio
displays
an
error number, write it down and provide it to
your dealer when reporting the problem.
PREV
(1):
Press this button to search for the previous
selection on the tape. Your tape must have at least three
seconds of silence between each selection for PREV to
work. The sound will mute while seeking.
NEXT
(2):
Press this button
to
search for the next
selection
on
the tape. Your tape must have at least three
seconds of silence between each selection for NEXT to
work. The sound will mute while seeking.