Owner`s manual

3.
Tf the fluid level is low, add only enough ‘of the propex
fluid to bring the level into the cross-h8tched .area on
the dipstick
1. ‘$dl out the dipstick.
4. If the fl~d level is in @e accepta~le range, pusn me NOTICE:
@s;tick back in all the way.
33[ow to Add Fluild
Refer to the Maintenance Schedule to determine what
kind
of transaxle-fluid to use. S’ee ‘‘Recanmended
Fl~ds. and Lubricants’’ in the Tndex.
3. After adding fluid, recheck the fl&d lewl as
4. When the correct fluid Level is obtained, push the
described under “‘How to Check.”’
dipstick back in all the way.