Manualshelf

Owner`s manual

ManualsBrandsBuick ManualsAutomotive1997 Skylark
919293949596979899100
3.
Push the SET button at the end of the lever and
release it. The
CRUISE
light on your instrument
panel will come on.
4.
Take your foot off the accelerator pedal.
Resuming
a
Set
Speed
Suppose you set your cruise control at a desired speed
and then you apply the brake. This,
of
course, shuts off
the cruise control. But you don’t need to reset it. Once
you’re going about
25
mph
(40
km/h)
or more, you can
move the cruise control switch from
ON
to
R/A
for
about half a second. You’ll
go
right back up to your
chosen speed and stay there.
Remember,
if
you hold the switch at
R/A
longer than
half a second, the vehicle will keep
going
faster until
you
release the switch or apply the brake. You could be
startled and even lose control.
So
unless you want to
go
faster, don’t hold the switch
at
R/A.