Owner`s manual

Twilight Sentinel
Light Sensor
Twilight sentinel turns your
lamps on and
off by sensing
how dark it is outside.
Your twilight sentinel and
DRL work with the light
sensor on top of the
instrument panel. Don’t
cover it up. If you do, the
sensor will read “dark” and
the headlamps will turn on.
To operate it, leave the lamp switch off.
If you move the control all the way
to MAX, your
headlamps will remain on for three minutes after you
turn off your engine.
As you move the control toward
MIN, the headlamps will turn
off more quickly when
you turn off your engine. You can change this delay time
from only a few seconds to three minutes.
The exterior lamps can be completely shut off while
the vehicle is in
PARK (P) by sliding the twilight
sentinel control all the way toward MIN, and release.
To
turn the exterior lamps back on, slide the control
all the way toward MIN again, and release; or, shift
out of
PARK (P).
Interior Lamps
Instrument Panel IntensityBrightness Control
The instrument panel
intensity can be adjusted by
moving this lever between
LO and HI. The instrument
panel lights will be on
only when the headlamps
are on. The interior courtesy
lamps can be turned on by
sliding the lever all the
way to the right.
2-42