Owner`s manual

If your vehicle has wire
wheel covers, remove them
as follows:
1.
Use the wire wheel key
wrench to remove the
wheel cover.
2.
Using the flat end of the
key wrench handle,
between the wire wheel
cover and the center cap,
pry off the center cap.
3. Remove the
theft-deterrent
nut, by
placing the key end of
the wire wheel key
wrench over the
nut and
turning it to the left.
Pull off the wire wheel
cover. Store it
in the
trunk until the flat tire is
repaired or replaced.
Note: When replacing the wheel cover, carefully line up
the tire valve stem and the notch in the wheel cover.
5-28