Owner`s manual

5. Replace the bulb and reverse the steps to install the
new bulb assembly.
Rear Turn Signals
1. Open the trunk. Turn the screw to the left
(counterclockwise) located just inside
of the
trunk and remove.
2. Pull the carpet away from the rear area to access
the turn signal bulb assembly.
3. Turn the bulb socket one-quarter turn to the left
(counterclockwise), while pressing it firmly.
4. Pull the bulb socket straight out of the assembly.
5. Remove the old bulb by pulling it straight out.
6. Replace with a new bulb by pushing the bulb straight
into the socket until the bulb clicks into place.
7. Turn the bulb socket one-quarter turn into the
8. Reverse Steps 1 through 3 to reinstall the
assembly
to lock it back into place.
bulb assembly.
6-35