Owner`s manual

3. Be sure that the belt is not twisted and it lies flat. 4. Buckle, position and releasd the safety belt as
The elastic cord must be under the belt and the guide
described in “Rear Seat Outside Passenger Positions”
on top.
earlier in
this section., Make sure that the shoulder
belt crosses the shoulder.
To remove and store the comfort guides, squeeze the belt
edges together
so that you ca~ take them out from the
guides.
fill the guide upward to expose its storage clip,
and then slide the guide onto
the clip. Rotate the guide and
clip inward and in between the seatback and the interior
body, leaving only the loop
of elastic cord exposed.
1-31