Owner`s manual

Use the following procedure to change modes:
1.
2.
3.
4.
5.
Close all the doors and turn the ignition on. Keep all
doors closed throughout this procedure.
Press and hold LOCK on the driver’s power door
lock switch through Step
4.
Press the LOCK button on the remote keyless entry
transmitter. The automatic door locks will remain in
the current mode.
Press the
LOCK button on the transmitter again.
Each time the transmitter’s LOCK button is pressed,
the mode will advance by one, going from
3 to 0 to
1, etc.
Note: The door locks will cycle according
to the
mode entered while customizing the memory door
locks. (Mode
“0” has no feedback.)
Release the power door lock switch. The
automatic door locks will remain in the most
recent mode selected.
Delayed Locking (If Equipped)
This feature lets the driver delay the actual loclung
of the vehicle. When the power door lock switch is
pressed with the key removed from the ignition, and
the driver’s door open, a chime will sound three times
to signal that delayed locking
is active. When all doors
have been closed, the doors will lock automatically
after five seconds.
If any door is opened before this, the
five-second timer will reset itself once all the doors have
been closed again.
Pressing the door lock switch twice within two seconds
will override this feature.
Personal Choice Programming
The delayed locking feature can be turned on or off
for each remote keyless entry transmitter. Vehicles are
delivered with each transmitter defaulted with delayed
locking off.
To turn the feature on:
1. Press and hold LOCK on the driver’s power door
lock switch throughout this procedure. All the
doors will lock.
2-6