Owner`s manual

Turn Signal and Lane Change Indicator
The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow
you to signal a turn or a lane change.
To signal a turn, move the lever all the way up or
down. When the turn
is finished, the lever will
return automatically.
An arrow on the instrument
panel will flash in the
direction of the turn or
lane change.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold
it there until you
complete your lane change. The lever will return by
itself when you release it.
As you signal a turn or a lane change,
if the arrows
don’t flash but just stay on, a signal bulb may be
burned out and other drivers won’t see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don’t go on at all when you
signal a turn, check the fuse and check for burned-out
bulbs. See “Fuses and Circuit Breakers”
in the Index.
nrn Signal Reminder
If your turn signal is left on for more than 3/4 of a mile,
a chime will sound. To turn
off the chime, move the turn
signal lever to the
off position.
Headlamp HighLow Beam Changer
To change the headlamps from low beam to high or
high to low, pull the turn signal lever toward you.
Then release it.
When the high beams
are on, this light on the
instrument panel will
also be on.
2-35