Owner`s manual
Resuming
a
Set Speed
Setting the cruise control at a desired speed and then
applying the brake will end the cruise control function.
Once you’re going about
25
mph
(40
Wh) or more,
you can move the cruise control switch from
ON
to
R/A (Resume/Accelerate) briefly to reset. This returns
you to your desired preset speed.
If you hold the switch at R/A longer than half a second,
the vehicle will accelerate until you release the switch or
apply the brake.
So
unless you want to go faster, don’t
hold the switch at
R/A.
Increasing Speed While Using Cruise Control
There are two ways to
go
to a higher speed:
0
Use the accelerator pedal to
go
to a higher speed.
Push the SET button at the end of the lever, then
release the button
and
the accelerator pedal. You’ll
now cruise at the higher speed. Or,
0
Move the cruise switch from
ON
to
WA.
Hold
it
there until you reach a desired speed and then
release the switch.
To increase your speed in very small amounts, move
the switch to R/A for less than half a second and then
release it. Each time you do this, your vehicle will go
about
1
mph
(1.6
km/h)
faster.
The accelerate feature will only work after you have set
the cruise control speed by pushing the SET button.
Reducing Speed
W1~”
:
Using Cruise Control
There are two ways to reduce your speed while using
cruise control:
Push in the button at the end
of
the lever until you
reach a desired lower speed then release it.
0
To slow down in very small amounts, push the
button briefly. Each time you do this, you’ll go
1
mph
(1.6
km/h)
slower.
Passing Another Vehicle While Using Cruise Control
Use the accelerator pedal to increase your speed. When
you take your foot off the pedal, your vehicle will slow
down to the cruise control speed you set earlier.
2-39