Owner`s manual
Don’t let the
other
end touch anyhng until the next
step. The other end of the negative cable
doesn’t
go to
the dead battery. It goes to a heavy unpainted metal
part
on
the engine
of
the vehicle with the dead battery.
8.
Attach the cable at least
18
inches
(45
cm) away
from the dead battery, but not near engine
parts
that
move. The electrical connection is just as good there,
but the chance
of
sparks getting back to the battery is
much less.
9.
Now
start
the vehicle with the good battery and run
the engine for a while.
10.
Try to
start
the vehcle with the dead battery.
If
it
11.
Remove the cables
in
reverse order to prevent
won’t
start
after a few tries, it probably needs service.
electrical shorting. Take care that they don’t touch
each other or any other metal.
A. Heavy Metal Engine Part
B. Good Battery
C
.
Dead Battery
5-7