Owner`s manual
Remove the air cleaner assembly as
follows:
1.
Remove
the air duct clamp and separate the hose
from
the
air cleaner cover. Rotate the hose
on
the
throttle body upward
so
it is out of the way.
2.
Detach the electrical connector and remove the air
cleaner cover by flipping the two latches on the
bottom inboard side
of
the cover.
3.
Tilt and pull the cover toward the engine to
4.
Remove the old filter and install the new one.
disengage it from the assembly.
5.
Reinstall the air cleaner cover by sliding the tabs into
the base of the air cleaner and locking the two
latches. Reinstall the electrical connector.
6.
Rotate the inlet duct into position and slide it onto
the air cleaner outlet, then tighten the clamp.
Refer to the Maintenance Schedule to determine when to
replace the air filter.
See “Scheduled Maintenance Services” in the Index.
Operating the engine with the
a11
cleaner
oi
:an
cause you or others to be burned. The
air
cleaner
not only cleans the air, it stops flame if the engine
backfkes.
If
it isn’t there, and the engine
backfires, you could be burned. Don’t drive with
it
off,
and be careful working on the engine with
the
air
cleaner
off.
NOTICE:
If
the
air
cleaner is
off,
a backfire can cause
a
damaging engine fire. And, dirt can easily get
into
your
engine, which will damage it. Always
have the air cleaner in place when you’re driving.
6-16