Instruction Manual

2-83
Speedometer and Tamper
Resistant Odometer
Your speedometer lets you see your speed in both
miles per hour (mph) and kilometers per hour (km/h).
Your odometer shows how far your vehicle has been
driven, in either miles (used in the United States) or
kilometers (used in Canada).
Your vehicle has a tamper
-resistant odometer.
You may wonder what happens if your vehicle needs a
new odometer installed. If the new one can be set to the
mileage total of the old odometer, then that will be done.
If it can’t, then it’s set at zero and a label must be put on
the driver’s door to show the old mileage reading when
the new odometer was installed.
If your vehicle is equipped with the Driver Information
Center (DIC), you may toggle the odometer to either
miles (used in the United States) or kilometers (used in
Canada). See “Driver Information Center” in the Index.
Trip Odometers
In addition to the standard odometer, the cluster can also
display a trip odometer. The display can be toggled
between the odometer and the trip odometer by quickly
pressing and releasing the trip/reset button located to the
right of the temperature gage. The display toggles once
each time the trip/reset button is pressed for less than
one and a half seconds. The display toggles in the
following sequence: Odometer
-- Trip Odometer.
The trip odometer will continue to keep track of miles
(kilometers) driven even if they are not currently
displayed. To reset the odometer to zero (0), push and
hold the trip/reset button for at least one and a half
seconds, but less than three seconds. The trip odometer
that is showing in the display will be reset.