Owner's Manual

Taillamps, Turn Signal, Sidemarker,
Stoplamps and Back-up Lamps
To replace a taillamp, turn signal, sidemarker,
stoplamp or back-up lamp bulb, do the following:
1. Open the trunk. See Trunk on page 100
for more information.
2. Remove the convenience net if the vehicle
has one.
3. Remove the four plastic wing nuts retaining
the trunk trim. There are two wing nuts
located on the driver’s side (shown) and
two located on the passenger’s side of the
vehicle.
4. Pull back the trunk trim.
398