Owner's Manual

Notice: When replacing the battery, use care

not to touch any of the circuitry. Static

from your body transferred to these surfaces

may damage the transmitter.

To replace the battery in the RKE transmitter, do

the following:

1. Insert a ﬂat object, with a thin edge, into the

notch located below the panic alarm button,

and separate the bottom half from the top half

of the transmitter.

2. Remove the old battery. Do not use a metal

object to do this.

3. Slide the new battery into the transmitter with

the positive (+) side of the battery facing up.

Use one three-volt, CR2032 battery, or

equivalent type.

4. Snap the front and the back of the transmitter

together. Make sure the cover is on tight, so

water will not get inside the transmitter.

5. Test the operation of the transmitter with the

vehicle.