Owner's Manual

Black plate (33,1)
Buick Regal Owner Manual - 2013 - crc - 11/5/12
Vehicle Care 10-33
License Plate Lamp
Lamp Assembly
Bulb Assembly
1. Bulb Socket
2. Bulb
3. Lamp Assembly
To replace one of these bulbs:
1. Push the release tab toward the
lamp assembly.
2. Pull the lamp assembly down to
remove.
3. Turn the bulb socket (1)
counterclockwise to remove it
from the lamp assembly (3).
4. Pull the bulb (2) straight out of
the bulb socket (1).
5. Push the replacement bulb
straight into the bulb socket and
turn the bulb socket clockwise to
install it into the lamp assembly.
6. Push the lamp assembly back
into position until the release tab
locks into place.
Replacement Bulbs
Exterior Lamp
Bulb
Number
Back-up Lamp 3157 K
Fog Lamp H10
Front Turn
Signal Lamp
3457 NAK
Front Sidemarker
Lamp (Base)
194NA
High‐Beam
Headlamp (Base)
H7
License Plate Lamp 194
Low‐Beam
Headlamp/Daytime
Running
Lamp (DRL)
H11
Stoplamp/Turn
Signal Lamp
3157 K
Taillamp/
Sidemarker Lamp
3157 K
For replacement bulbs not listed
here, contact your dealer.