Owner`s manual

6.
7.
To install, attach the
wire connector
(A) to
the plastic base making
sure the lack tab
(B) is
over the lock
(C).
Install the bulb by
putting the small tab
(D)
into the small notch in
the lamp
(E).
8. Turn the bulb socket one-quarter turn clockwise to
lock it into place.
When reinstalling the headlamp assembly into the
headlamp mounting panel make sure the tab is
properly engaged in the panel slot.
illamps
For bulb type, see “Replacement Bulbs” in the Index.
1
1. Open the trunk. Pull the carpet away from the rear
area to access the
trunk taillamp bulbs.
6-31