User Guide

The safety belt locks if there’s a sudden stop or a

crash, or if you pull the belt very quickly out of

the retractor.

Each position next to the windows in the second

row has a shoulder belt height adjuster. Move

the shoulder belt adjuster to the height that is right

for you.

To move it down, push down on the button and

move the height adjuster to the desired position.

You can move the height adjuster up just by pushing

up on the shoulder belt guide. After you move the

adjuster to where you want it, try to move it

down without pushing the button down to make

sure it has locked into position.

Adjust the height so that the shoulder portion of the

belt is centered on your shoulder. The belt should

be away from your face and neck, but not falling off

your shoulder.

{CAUTION:

You can be seriously hurt if your shoulder belt

is too loose. In a crash, you would move

forward too much, which could increase injury.

The shoulder belt should ﬁt against your body.

To unlatch the belt, just push the button on the

buckle.

1-41