Installation Guide

4. Using a sharp uƟůŝƚy Ŭnife, remove the tongue strip on the long end of the repůĂĐement planŬ. In addŝƟon, remove the
ĐŽƌner of the groove on the short end of the repůĂĐement planŬ for easier inseƌƟon.
5. PosŝƟon the repůĂĐement planŬ by engaging the groove into the tongue of the adjoining planŬ an d wiggle into půĂĐĞ.
Use “superglue” or equivalent or latex to hold the repůĂĐement planŬ in půĂĐe with its adjĂĐĞŶt planŬs.