Instructions / Assembly

3
WARNING: Cancer and
Reproductive Harm
www.P65warnings.ca.gov
REMOVE THE PACKAGING & INSPECT THE DOOR
INSPECT THE DOOR
DOOR HANDLING
• Make sure the door slab is secured to the frame prior to installation.
• Do not put stress on joints, corners or frames.
• Store door in dry, well-ventilated area in vertical, leaning position (jamb side to the wall)
to allow air circulation; do not stack horizontally or drag on the oor
• Protect from exposure to direct sunlight during storage.
• Install only into vertical walls and when conditions are dry.
If any of the above conditions represent a concern, do not install the door.
Contact your dealer or distributor for recommendations.
Product squareness: Measure the door corner-to-corner diagonally in both
directions. If the product is square, the measurements should match.
90°
Check for any cosmetic damage that may have occurred during
manufacturing or shipping
Correct product: Check the product is correct by comparing to the order forum
(size, color, handing, glazing, etc.)
Check for the correct door handing: To determine door swing (left or right), face the
door from the side where hinges cannot be seen. Right handed doors open to
the right, while left handed doors open to the left.
?
• Remove packaging.
• Remove shipping materials such as corner covers, shipping blocks or pads.
Note! Be sure to remove the shipping clips from the door before beginning the installation.