Instructions / Assembly

4
WARNING: Cancer and
Reproductive Harm
www.P65warnings.ca.gov
INSPECT THE ROUGH OPENING
A
B
C
E
D
Verify the width and height of the rough opening is 1/2" larger than the door frames width/
height. Make sure the oor/sill area and rough opening are both level, by ensuring the surfaces
(C, D, E) are plumb, and the opening is square by measuring the diagonals (A, B). The measure-
ment of (A) and (B) should be the same. Maximum allowable deviation from square is 1/4".
Before starting step 3, determine if the customer wants the door to be a Left Hand Door or a Right
Hand Door. Refer to www.orepac.com/resources/door-handing for more information on handing.
Outside
Le Hand Inswing
A
Right Hand Inswing
Outside
B
Right Hand Outswing
Outside
C
Figure 1
Le Hand Outswing
Outside
D