Instructions / Assembly

WARNING: Cancer and

Reproductive Harm

www.P65warnings.ca.gov

INSTALL THE DOOR

Warning! To avoid injury, use at least two people to install.

Adequately support the door until completely fastened.

Measure and

trim additional

door jam X2.

Jamb

Door Slab

Rough Opening

STEP 1:

Pre-hung door frames extend below the slab to

allow for different oor heights. The jambs can be

trimmed as needed before beginning installation,

however make sure to leave adequate space to

allow air to pass under the door according to

ventilation codes.

STEP 2:

Remove any nails, tacks or packaging that

hold closed the door.

Frame Hinge

Side

Wall

STEP 3:

Position the door unit into the rough opening.

Square and plumb the hinge side of the jamb.

Shim jamb from both sides to prevent twisting.

Fasten shims with 10d nish nails approximately

2" from the top and 2" from the bottom of the

jamb to plumb and temporarily secure in place.

Figure 2

Figure 3