Instructions / Assembly
7
WARNING: Cancer and
Reproductive Harm
www.P65warnings.ca.gov
INSTALL THE DOOR
STEP 7:
Position trim or slide trim assembly (two piece
jamb) onto the frame. Carefully nail the trim on
both sides of the door every 12" to 16" using 4d
nishing nails. (See Figure 7.)
STEP 1:
Fill any nail/screw holes and
sand smooth.
STEP 2:
Finish all six sides of the door
slab and the frame as instructed
in the Wood Door Care & Finishing
Recommendations.
STEP 3:
Install lockset hardware per
supplied instructions.
STEP 4:
Protect recently installed units from
damage from plaster, paint, etc. by
covering the unit with plastic.
FINISH THE INSTALLATION
(Continued)
Door Slab
Trim
Figure 7