Installation Guide
6
9. Measure the inside distance between skirt legs. Trim skirt face board to this length minus 1/2" (gure D).
Insert skirt face board into leg edge openings with the skirt face board return facing down to ensure that
it ts properly (gure E).
10. Attach front of skirt face board to the inside of legs using construction adhesive (be careful to avoid
adhesive squeeze-out).
11. Place mantel shelf over mantel mounting board, resting it on top of the legs. Conrm that it ts snug
against all surfaces.
12. Draw a faint line to mark the top of the edge of the mantel (gure F). Be sure the shelf is level.
13. Remove the mantel shelf and draw a parallel pencil line 1/2" below the line created in step 12 (gure G).
This line indicates the top of the mounting board supplied with your mantel shelf.
4-PIECE FIREPLACE SURROUND INSTALLATION
( Continued )
AERIAL
VIEW
wall
BOTTOM
"RETURN"
FRONT
"FACE"
Fig D
Fig F
Fig E
Fig G