Specification

JUMBO MOUNT
FEATURES:
-Mounts flush on exterior surface
-Easy to install on all types of exteriors
-Single unit body construction of Mount and Ring
-J-Channel eliminated
-Finish trim ring adjusts for a range of siding thickness
-Templates for 3-5/8" and 4-1/4" cut out on reverse side.
-Paintable version available
jumbo_mount_spec.ai
Issued: 08/24/12
Revised:
SPECIFICATIONS:
Material: Base: UV stabilized copolymer; color molded in; .100" nominal wall
Ring: UV stabilized copolymer; color molded in; .100" nominal wall
Fabrication: Two piece molded assembly
Trim ring single piece molded unit
Attachment: Screw or nail directly to any surface.
Packaging: 10 pack & 1single pack
Dimensions: See drawing below (all dimensions in inches)
The Jumbo Mount is used for mounting all exterior fixtures.
The exclusive lock on trim ring speeds installation on any surface: wood, vinyl,
aluminum, stucco or hardwood.
3/4”, 1“, 1 1/4”
12 1/16"
6"
10"
8 1/8"