Product Manual

Installation location:
[Need to modify to include SWVM brass + Cable Harness]
NOTE: Water shutoff valves and leak detection devices should NEVER be installed on a fire
suppression system.
The Smart Water Valve+Meter must be installed:
• In a dry, indoor location.
• Downstream from the main shut-off valve on the desired water supply line.
• With the control unit located above the brass valve+meter. Use drip loops wherever
possible to avoid damaging the electronics in the event of a leak.
• In compliance with all local plumbing and electrical codes.
• Within 20 feet of a wall outlet.
• Easily visible and accessible to the end user.