Product Manual

• Note: The Hub or Panel
may be unaware that
this procedure was
performed, so it is
recommended that you
remove the Smart
Thermostat HD from
the Z-Wave network
before performing this
reset.
The Display is not working.
• The Display may not be
configured to wake up
when you approach.
• The Display may not be
receiving power.
• Tap the screen which
should wake up the
Display
o Note: If you
would like your
Display to wake
up in response
to your
movement in
front of it,
please check
the settings in
the
configuration
menu.
• Ensure that the Display
is powered
o Remove the
Display from
the Thermostat
and make sure
the LED on the
Thermostat is
on, this
indicates the
Thermostat has
power and
should be able
to power the
Display.
o Put the Display
back on the
Thermostat
• !CAUTION: If the Display
is broken and cannot
communicate with the
Thermostat, or is