User's Manual

**Note – whenever out of main screen – all lasers are off and laser outputs (including from

manual operation) are disabled**

This menu allows the user to edit device output definitions during custom scenario

generation.

The device ID here is only MM (master/repeater). It cannot be changed because these are

drills.

The user can add a manual name to each projection (for example, hand, gun, knife) that

will be displayed in the drill tables. The names entered here will apply to ALL DRILLS only.

They do not apply to custom scenarios.

Selecting Remove Device is not available here because only the master device is relevant on

the pre-set drills.

Name Device Projections

<< Manage Pre-Set Drills

Device ID MM

Red

---------

Green

---------

Forrest ---------

<< Save and Return

Main Display > Settings > Drills + Custom Prog > Pre-set Drills