User's Manual

16
Mode The purpose of the mode option is to allow the user to quickly switch
the operating mode of the device from the main screen, without going off into
the settings menu.
The options here for the MVP are below. There will be other modes, to
include scenario mode (downloadable commercial content), that will be
developed post MVP.
Manual – this mode involves the device being intended to be used where all
inputs/outputs happen through manual manipulation of the device buttons.
If multiple devices are linked (ie. master device and sub device(s)) the sub
device(s) output information will be fed to the master device for display.
Parset – this mode places the device in a very simple operating mode, as
described on page 8. When the “initiate/audio” button is pressed, the device
will run the parset program that has been programmed manually into the
device through the settings menu. When this mode is set, the par stimulus
and defined time period will be displayed in “par”.
Drill – this mode (formerly called “geezer” mode) consists of set programs
(output patterns) that are “hardwired” into the device (just not editable by
the user, they don’t have to be anything special from a programming or
database standpoint). This is one of the simplest operational modes where
there is a one button interface with the device. When the I/A button is pushed,
the device will run one of the defined output patterns, randomly selected.
Custom – this allows the user to run custom, user generated,
scenarios/programs
Default is Drill.
NURO Main Display
000.00
MSTR
YY DD MM
24HR
BATXXX%
R
G
F
Par: Off
Settings
Mode: Manual
Save
Prog: None
ID
ACT
SPLIT
TIME
XX
STRT
XXX.XX XXX.XX
ID
XXXX
SPLIT TIME
ID
ACT
SPLIT TIME
ID
ACT
SPLIT TIME
ID
ACT
SPLIT TIME
ID
ACT
SPLIT TIME
ID
ACT
SPLIT
TIME
ID
ACT
SPLIT TIME
Link: XX
ISO: XX
Ctrl: XXXXXXXX
XXXXXXXXXXXXX